Lexmark CX310 Series User Manual page 100

Understanding the printer menus
Use
Allow color copies
On
Off
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
4‑up Portrait
2‑up Landscape
4‑up Landscape
Print Page Borders
On
Off
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Enable color in copies.
Notes:
•
On is the factory default setting.
•
Setting this to Off will hide all color‑specific menus.
•
This setting overrides the Color setting.
Specify whether an original document is two‑sided (duplex) or one‑sided, and
then specify whether the copy should be two‑sided or one‑sided.
Notes:
•
1 sided to 1 sided—The original document has print on one side, and the
copy will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while
the copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while
the copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and
the copy will also have print on both sides.
Allow copying of two or four sheets of a document on one page.
Note: Off is the factory default setting.
Allow page borders in printed copies.
Note: Off is the factory default setting.
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
100