Copying On Letterhead - Lexmark CX310 Series User Manual

Copying
4
Navigate to:
Copy to > > select the tray containing the transparencies >
a number on the keypad >
5
If there are no trays that contain transparencies, then do the following:
a
Navigate to:
Copy to >
b
Load transparencies into the multipurpose feeder, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
6

Copying on letterhead

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
4
Navigate to:
Copy to > > select the tray containing the letterhead >
number on the keypad >
5
If there are no trays that contain letterhead, then do the following:
a
Navigate to:
Copy to >
b
Place the letterhead faceup, top edge first into the multipurpose feeder, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
6
> Manual Feeder >
> Copy from > select the size of the original document
> Manual Feeder >
> select the size of the transparencies >
> select the number of copies or enter a
> select the size of the letterhead > Letterhead
> select the number of copies or enter
> Transparency >
.
.
.
.
.
57
.