Adjusting Copy Quality - Lexmark CX310 Series User Manual

Copying
3
From the printer control panel, navigate to:
> Copy > > Darkness > adjust the darkness setting > select the number of copies or enter a number
on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
Press the left or right arrow button to scroll to Finish the Job, and then press
4

Adjusting copy quality

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
> Copy >
4
Press the left or right arrow button to scroll to one of the following:
•
Text—The content of the original document is mostly text or line art.
•
Text/Photo—The original document is a mixture of text and graphics or photos.
•
Photo—The original document is mostly a photo or an image.
•
Graphics—The original document is mostly business‑type graphics, such as pie charts, bar charts, and
animations.
Press the up or down arrow button until Content Source appears, and then press the left or right arrow
5
button to scroll to one of the following:
•
Color Laser—The original document was printed using a color laser printer.
•
Inkjet—The original document was printed using an inkjet printer.
•
Magazine—The original document is from a magazine.
•
Press—The original document is from an offset press.
•
Black/White Laser—The original document was printed using a mono laser printer.
•
Photo/Film—The original document is a photo from a film.
•
Newspaper—The original document is from a newspaper.
•
Other—The original document was printed using an alternate or unknown printer.
> Content Type > select the content type of the original document
.
.
60