Task
Display the MVRP statistics.
Display the dynamic VLAN
operation information of
the specified port.
Clear the MVRP statistics of
the specified ports.
Configuration example for MVRP in normal
registration mode
Network requirements
As shown in
other VLANs to MSTI 0.
Configure MVRP and set the MVRP registration mode to normal, so that Device A, Device B, Device C,
and Device D can register and deregister dynamic and static VLANs and keep identical VLAN
configuration for each MSTI.
When the network is stable, set the MVRP registration mode to fixed on the port that connecting Device
B to Device A, so that the dynamic VLANs on Device B are not de-registered.
Command
display mvrp statistics [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
display mvrp vlan-operation interface
interface-type interface-number [ | { begin
| exclude | include } regular-expression ]
reset mvrp statistics [ interface interface-list ]
Figure
70, configure MSTP, map VLAN 10 to MSTI 1, map VLAN 20 MST 2, and map the
211
Remarks
Available in any view
Available in any view
Available in user view