Displaying And Maintaining Gvrp; Gvrp Configuration Examples; Gvrp Normal Registration Mode Configuration Example - HP 5120 EI Series Lan Switching Configuration Manual

Hide thumbs Also See for 5120 EI Series:
Table of Contents

Advertisement

If you want to restore the default settings of the timers, restore the Hold timer first, followed by the
Join, Leave, and LeaveAll timers.
Table 19 Dependencies of the GARP timers
Timer
Hold
Join
Leave
LeaveAll
NOTE:
To keep the dynamic VLANs learned through GVRP stable, do not set the LeaveAll timer smaller than its
default value, 1000 centiseconds.

Displaying and maintaining GVRP

Task
Display statistics about GARP on
ports.
Display GARP timers on ports.
Display the local VLAN
information that GVRP maintains
on ports.
Display the current GVRP state in
the specified VLANs on ports.
Display GVRP statistics on ports.
Display the global GVRP state.
Display the information about
dynamic VLAN operations on
ports.
Clear the GARP statistics on ports.

GVRP configuration examples

GVRP normal registration mode configuration example

Network requirements
As shown in
Lower limit
10 centiseconds
No less than twice the Hold timer
Greater than twice the Join timer
Greater than the Leave timer
Command
display garp statistics [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
display garp timer [ interface interface-list ] [ | { begin |
exclude | include } regular-expression ]
display gvrp local-vlan interface interface-type
interface-number [ | { begin | exclude | include }
regular-expression ]
display gvrp state interface interface-type
interface-number vlan vlan-id [ | { begin | exclude |
include } regular-expression ]
display gvrp statistics [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
display gvrp status [ | { begin | exclude | include }
regular-expression ]
display gvrp vlan-operation interface interface-type
interface-number [ | { begin | exclude | include }
regular-expression ]
reset garp statistics [ interface interface-list ]
Figure
56:
Upper limit
No greater than half of the Join timer
Less than half of the Leave timer
Less than the LeaveAll timer
32,765 centiseconds
168
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
user view

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 ei series5500 si series

Table of Contents