Task
Performing mCheck
Configuring TC snooping
Configuring protection functions
PVST configuration task list
Task
Configuring
the root
bridge
Configuring
the leaf
nodes
Configuring the maximum port rate
Configuring edge ports
Configuring path costs of ports
Configuring the port priority
Configuring the port link type
Configuring the mode a port uses to recognize/send MSTP
packets
Enabling outputting port state transition information
Enabling the spanning tree feature
Setting the spanning tree mode
Configuring the root bridge or a secondary
root bridge
Configuring the device priority
Configuring the network diameter of a
switched network
Configuring spanning tree timers
Configuring the timeout factor
Configuring the maximum port rate
Configuring edge ports
Configuring the port link type
Enabling outputting port state transition
information
Enabling the spanning tree feature
Setting the spanning tree mode
Configuring the device priority
Configuring the timeout factor
Configuring the maximum port rate
Remarks
Required
Configure the device to operate in PVST
mode.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
Required
Configure the device to operate in PVST
mode.
Optional
Optional
Optional
72
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
Optional
Optional
Optional