HP 5120 EI Series Lan Switching Configuration Manual page 225

[DeviceD-GigabitEthernet1/0/2] quit
Verifying the configuration
Verify the normal registration mode configuration:
1.
Use the display mvrp running-status command to display the local MVRP VLAN information to
verify whether the configuration takes effect.
# Check the local VLAN information on Device A.
[DeviceA] display mvrp running-status
-------[MVRP Global Info]-------
Global Status
Compliance-GVRP
----[GigabitEthernet1/0/1]----
Config
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Local VLANs :
1(default),
----[GigabitEthernet1/0/2]----
Config
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Local VLANs :
1(default),
----[GigabitEthernet1/0/3]----
Config
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Local VLANs :
1(default), 20,
The output shows that:
Ports GigabitEthernet 1/0/1 and GigabitEthernet1/0/2 have learned only VLAN 1 through
MVRP.
: Enabled
: False
Status
Status
Status
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
216