Power - Digital Projection INSIGHT 4K Quad Series Protocol Manual

Digital Projection

Power

power standby.mode
The and commands can assign the values in the table below to both projectors:
<command> <operator>
power = ?
standby.mode = ?
INSIGHT 4K Series Protocol Guide
<values>
on
off
standby
normal
super
POWER
Notes
off standby
and are functionally
equivalent.
normal
In standby the projector
will consume more power in standby
mode but will start up more quickly.
super
In standby the projector
will consume less power in standby
mode but will start up more slowly.
Rev A June 2016
page 3