2. Installation
Power connection
USA power input
Make sure the main power switch is off before connecting the power cable.
Firmly push in the Hubbell connector, then turn clockwise to lock.
Rest of World power input
Make sure the main power switch is off before connecting.
Lift the lid of the C-form connector then fi rmly push in the connector.
Page 2.18
LIGHTNING 30sx+c, 40sx+c
Digital Projection
User Manual
Notes
Use only the power cable
provided.
Ensure that the power
outlet includes a Ground
connection, as this
equipment MUST be earthed.
Handle the power cable
carefully and avoid sharp
bends. Do not use a damaged
power cable.
105-941A January 2007