Table of Contents
Advertisement
Media
Useable media sizes and notes for handling are described.
Usable sizes of media
Type of Recommended media
Maximum width
Minimum width
Maximum printing width
Thickness
Roll outside diameter
Roll weight
Roll inside diameter
Side printed
Roll end treatment
Caution in handling of medias
Pay attention to the followings for handling of medias.
• Use media recommended by MIMAKI to ensure reliable, high-quality printing.
Set the heater temperature to meet the characteristics of the media.
• Set the temperature of the Pre-heater, Print heater and Post-heater according to the type and
characteristics of the media used.
Automatic temperature setting can be made on the operation panel by setting the profile on the
dedicated RIP. For setting on the RIP, refer to the instruction manual for your RIP.
• Pay attention to the expansion and contraction of the media.
Do not use media immediately after unpacking. The media can be affected by the room temperature and
humidity, and thus it may expand and contract.
The media have to be left in the atmosphere in which they are to be used for 30 minutes or more after
unpacked.
• Do not use curled media.
This may result in paper jamming.
If a regular-sized coated sheet of media is rolled and stored, the coated side has to face outside.
• Be careful to dusts on the edge face of the medium.
Some rolls have dusts contained in the package gathered on the edge surface of the roll. If you use as it
is, the drawing quality may be degraded due to nozzle missing or ink drops. Be sure to set the roll after
removing dusts adhering on the edge face of the roll.
1-14
Downloaded From ManualsPrinter.com Manuals
Model
Tarpaulin/
Weatherproof PVC
2642mm
210mm
2632mm
1.0mm or less
φ 180mm or less
25kg or less
3 or 2 inches
Side facing outward
The roll end is gently fixed to the core with weak-adhesive tape or
weak glue for easy removal.
JV33-260BS
FF(Flexible
Face)/
Photo paper/PET/Artificial paper/
Transfer paper
Advertisement
Table of Contents
