Extron electronics StudioStation 100 User Manual page 90

Command and Response Table (continued)
SIS Command
Command
Function
(Host to Device)
IP Setup Commands
E
Set date / time
HH:MM:SS CT
E
View date / time
E X4*
Set time zone
E
Example:
E
View time zone
Example:
E
View all time zones
E
Set DHCP on
E
Set DHCP off
E
View DHCP mode
E
Set IP address,
subnet mask,
gateway
NOTE: The CISG command resets the network immediately without the need for a BOOT command.
E
View IP address,
subnet mask,
gateway
E X5)
Set IP address
E
View IP address
E
View hardware MAC
address
E X5!
Set subnet mask
E
View subnet mask
E X5)
Set gateway IP
address
E
View gateway IP
address
E X5)
Set DNS server
IP address
E
View DNS server
IP address
E
Set current port
timeout
X*
= On/off
NOTES:
X4&
= Local date/time
X4*
= Time Zone
X4(
= Time zone offset
X5)
= IP Address
X5!
= Subnet Mask
X5@
= Hardware MAC address
Response
(Device to Host)
MM/DD/YY‑ Ipt •
}
} X4& ]
CT
}
* TZON Tzon •
}
PST * TZON
Tzon •
} X4*
TZON
PST*(UTC‑08:00/UTC‑07:00
•
} X4*
* TZON
...
X4*
}
1DH Idh1
}
0DH Idh0
} X* ]
DH
X5) X5! X5) }
1* * * CISG Cisg1*IP/subnet bits*gateway
}
1CISG IP
192.168.254.253/16*0.0.0.0
Example:
}
CI Ipi •
} X5) ]
CI
} X5@ ]
CH
Iph •
}
CS Ips •
} X5! ]
CS
}
CG Ipg •
} X5) ]
CG
}
DI Ipd •
} X5) ]
DI
X6@ }
0 * TC Pti 0 *
0 = Disabled/unassigned/off/unmuted (Default), 1 = Enabled/assigned/on/muted
Set: MM/DD/YY‑HH:MM:SS
Read: day of week, date, month, year HH:MM:SS
(for instance, Fri, 21 Apr 2017 10:54:00)
Acronym (2 to 6 letters) Example: PST for Pacific Standard Time
GMT offset value (– 12:00 to 14:00) representing hours and minutes (HH:MM) local time is
offset from GMT time and includes the time zone name.
Example: PST*(UTC‑08:00) Pacific Time
Default IP address: 192.168.254.253, Default Gateway: 0.0.0.0, Default DNS: 0.0.0.0
Default: 255.255.0.0
00‑05‑A6‑xx‑xx-xx
StudioStation 100 • Remote Communication and Control
X4& ]
X4* X4( ]
*
PST*(UTC‑08:00/UTC‑07:00)
X4( ]
*
)
]
Pacific Time
X4( ]
*
X4( ]]
*
]
]
]
/
subnet bits*gateway
X5) ]
X5@ ]
X5! ]
X5) ]
X5) ]
X6@ ]
Additional Description
Set the date and time.
View the date and time.
]
•
Pacific Time
Verbose mode 2/3 response
adds Tzon • to beginning of
string.
Repeat for all time zones
Verbose mode 2/3 adds Tzon •
to beginning of string.
Set DHCP to on.
Set DHCP to off.
0 = DHCP off (Default).
1 = DHCP on.
]
]
View the hardware MAC
address of the unit.
Verbose mode 2/3.
Set the gateway IP address.
View the gateway IP address.
Set the DNS server IP address
(Default: 0.0.0.0).
View the DNS server
IP address.
83