File Storage - Extron electronics StudioStation 100 User Manual

Input
Deinter-
lacing,
HDMI/DVI scaling,
rasterizing
(with or
without analog
line level
analog audio)
Figure 2.

File Storage

Internal storage is available for storing recordings to be uploaded to a file server. The
StudioStation 100 has a 32GB SD card internally, which is field upgradable to different
storage sizes (see
size in the storage information table found on the File Management embedded web page
(see Storage Information in the Help file) or in the storage information table found on
the Device Status embedded web page.
Two USB ports (one on the front panel, one on the rear panel) provide a connection for
portable, user-provided USB drives for storing recordings.
The RCP 101 also has a USB port to connect a user-provided USB drive for storing
recordings.
StudioStation 100
Frame rate
conversion
Record
encoding
External USB drive
(front or rear port, or
RCP 101)
Stream
encoding
+12 V Control Data /
power signals recording
RECORD
MARK
USB STORAGE
RCP 101
StudioStation 100 Block Diagram
Upgrading the SD Card
Recording
Automatic
les
upload of
recording
and /or
Internal
network
storage
LAN
Network
port
Web Page
AV Controls
preview
= Recorded le upload (if set up)
= Optional streamed output
2
For automatic uploading, set a default
destination (Extron Entwine EMP system,
Kaltura system, Opencast system, or an
FTP, SFTP, or CIFS server location) to
which to publish recordings (Recorded
Events >
Publish Settings).
on page 114). You can view the total storage
StudioStation 100 • Introduction
Outputs
HDMI/DVI
rear panel
local output
2
to a
drive
Streamed
TCP/IP
output
panel
6