Sd Card Formatting - Extron electronics StudioStation 100 User Manual

SD Card Formatting

All data is erased as part of the card initialization, so Extron recommends that any data on
the old card be backed up before the new card is installed.
Once the new card is installed the user must format the card via the embedded web page:
Troubleshooting > System Resets > Reset > Delete Content
The unit reboots after formatting. The SD card is ready for recording after the reboot.
Alternatively, the user can initiate a
steps:
1. Press and hold the
The
Mark
content.
2. Press the
If the
Mark
The StudioStation 100 automatically reboots after card formatting is completed.
Delete
and buttons simultaneously for 5 seconds.
Stop Pause
button blinks red for 3 seconds while awaiting confirmation to
button within 3 seconds to confirm the
Mark
button is not pressed, the request is cancelled.
content from the front panel by following these
content command.
Delete
StudioStation 100 • Reference Information
Delete
116