Edid - Extron electronics StudioStation 100 User Manual

EDID

The page within the
EDID
information (resolution and refresh rate) between the HDMI input and the output source. The
StudioStation 100 uses EDID Minder, which ensures that a source device connected to the
StudioStation 100 input continuously sees the EDID of a sink device.
This page allows you to select from 38 factory-loaded EDIDs or create up to three custom
EDIDs (see
The default EDID for the StudioStation 100 is 720p @ 60 Hz.
To open this page, click the
embedded web pages and then click the
Figure 34.
The
EDID Minder
1
Figure 35.
To select an EDID:
1.
Open the
2. Select the resolution and refresh rate from the
3. Select the
4. Click the
5. If you would like to save the selected EDID to your PC, click the download icon (
the
INPUT
See the StudioStation 100 Help File for additional information.
Configuration
Table 1. EDID Values on page 92 for the complete list of available EDIDs).
Configuration
Configuration Tab, EDID Subtab
page opens.
EDID Minder Page
page (see figure 35).
EDID Minder
checkbox ( ) in the
Source 2
button ( ) in the
Assign 3
pane.
StudioStation 100 • Web-Based User Interface
tab provides a way to manage the EDID
tab at the top of the StudioStation 100
tab on the second tier of tabs.
EDID
2
EDID Selection
pane.
INPUT
pane.
INPUT
4
3
pane ( ).
1
) in
4
48