Extron electronics SMD 202 Setup Manual

SMD 202 • Setup Guide
The Extron SMD 202 is a compact, high performance media player and live stream decoder
for H.264 streaming applications. It provides the flexibility to present a locally connected AV signal, decode a live streaming
source, or play back media files from internal memory, removable SD card, local USB, or network storage. The SMD 202 supports
a wide range of media file container formats and streaming protocols, making it adaptable for use with a variety of encoded
media. Advanced signal processing, scaling, and aspect ratio management supply high quality signals to AV displays. An intuitive,
interactive on-screen menu provides easy setup and source selection using front panel buttons or the optional handheld IR
remote control. Designed for pro AV applications, the SMD 202 can be controlled using Ethernet, RS-232, IR, or wired IR.
Install the SMD 202
Before mounting and connecting the SMD 202, turn off all devices that will be connected to it. The SMD 202 is housed in a 1-inch
high, half-rack width, 6-inch deep metal enclosure that can sit on a table with the provided rubber feet or can be rack mounted.
Select a suitable location, then choose an appropriate mounting option.
Make all external device connections before applying power.
Rear Panel Features
A B
POWER
12V
1.3A MAX
USB
SMD 202 Rear Panel
Figure 1.
12 VDC power input
A
USB type A receptacle for external storage device
B
C Slot for additional storage on SD card (optional)
HDMI input
D
HDMI output
E
3.5 mm, 5-pole captive screw connector for analog
F
stereo audio input

Input Connections

HDMI input – Connect an HDMI (or DVI with suitable adapter) source to the HDMI input connector.
D
Audio input – Connect a balanced or unbalanced stereo (or dual mono) line level audio source to this 5-pole 3.5 mm captive
F
screw connector. Wire the connector as shown in figure 2, below.
Tip
Ring
Sleeve(s)
Tip
Ring
Balanced Stereo Input
(high impedance)
Audio Input Wiring
Figure 2.
C D E
SD
HDMI HDMI
Tip
Left
Sleeve
Tip
Right
Sleeve
Unbalanced Stereo Input
(high impedance)
F G H
INPUT INPUT OUTPUT OUTPUT
AUDIO AUDIO
IR IN
L R L R
S G
3.5 mm, 5-pole captive screw connector for analog stereo
G
audio output
3.5 mm, 3-pole captive screw connector for wired IR receiver
H
input
I 3.5 mm, 3-pole captive screw connector for Simple
Instruction Set (SIS™) control over RS-232 or serial
pass-through to other devices
Reset button and LED
J
RJ-45 Ethernet connector for connection to a LAN
K
Left
Right
Do not tin the wires!
I J K
SMD 202
RS-232
RESET
Tx Rx G
LAN
1