Extron electronics StudioStation 100 User Manual page 52

HDMI Output Configuration
Figure 29. HDMI Output Configuration Panel
The refresh rate for the output of the StudioStation 100 can be selected from the drop-down
list. Choose Hz or Hz. The
50 60
panel. It is configured in the
NOTE: The resolution of the local (preview) output follows (is based on) the recording
encoder resolution.
Outputting and using a video test pattern
NOTE: No input signal is needed when using a test pattern for display device setup.
The panel in the
OSD Configuration
immediate output of one of eight internally stored test patterns to the HDMI output from
the StudioStation 100 as well as to the recording and output stream. Video test patterns
are helpful for calibrating connected displays or projectors for color, convergence, focus,
resolution, contrast, and aspect ratio. The audio test option is used for testing audio output.
To select and output a test pattern:
1. Open the
Input/Output Settings
2. Expand the
OSD Configuration
3. Select a pattern from the
appears above the drop-down list. Available test patterns include the following:
Color Bars Time Stamp
Aspect Ratio 1.33:1 Aspect Ratio 1.78:1
Figure 30. Test Patterns
Select to output an audio pulse of 400 Hz at -10 dBu for audio output
•
Pulse
testing.
The
• Universal OSD
because it overlays the video rather than replacing it. As a result, the universal OSD
pattern can be used at any time (see
page).
The selected test pattern is immediately output to the display and reflected in the preview
in the panel. The test pattern displays until another pattern, or
AV Controls
from the drop-down list, or until unit power is recycled.
Test Pattern
NOTE: When a test pattern is selected, it is streamed to the display, stream, and
recording, overlaid atop the source AV material. If
drop-down list, the test pattern is turned off.
Pattern
of the HDMI output can be viewed in this
Resolution
Encoder Settings and Metadata
Input/Output Settings
page.
panel.
drop-down list. A preview of the test pattern
Test Patterns
Pulse
Aspect Ratio 1.85:1
pattern can be displayed together with the main AV content
Setting up the universal OSD
Off
StudioStation 100 • Web-Based User Interface
page (see page 50).
page allows selection and
Crop
Universal OSD
on the next
is selected
Off
is selected from the
Test
45