System Resets - Extron electronics StudioStation 100 User Manual

System Resets

The
System Resets
reboot, delete all stored content and format the internal storage, or perform one of five
different types of reset. Some of the reset options offered here can also be performed using
SIS commands.
To open this page, click the
and then click the
1
Figure 64.
The
System Resets
Figure 65.
Each option within this page includes a description of its function. To perform a reboot,
reset, or content deletion (storage reformatting), click the button for the desired option.
When a reset or reboot is performed, the unit reboots and loses its network connection.
After a reset or reboot, it may take a few minutes for the StudioStation 100 to restart
•
and connect to the network. Refresh the browser window to reconnect to the unit.
• For
Reset IP Networking Settings
network settings are reset to factory defaults. You must connect again using the default
addresses.
See the StudioStation 100 Help File for information about the system resets using the Web
UI.
page within
Troubleshooting
Troubleshooting
tab (see figure 64,
System Resets
2 3 4
Troubleshooting Tab, System Resets Subtab
page opens to the
Reset
System Resets Page
StudioStation 100 • Web-Based User Interface
contains options to initiate a unit
tab at the top of the embedded web pages
) on the second tier of tabs.
5
5
panel.
and , all IP addresses and
Factory Reset
68