Alarms - Extron electronics StudioStation 100 User Manual

Alarms

The
Alarms
in
Configuration > Alarms and Traps > Alarm Message List
here are read-only. The alarm list can be sorted, filtered, searched, or exported to a
comma-separated values (CSV) file.
To open this page, click the
embedded web pages, then click the
tabs.
1
Figure 60.
The
Alarms
1
Figure 61.
• Active, unresolved alarms are displayed as red text (see figure 61,
To clear or remove an alarm, click the row it is listed in and click
•
Alarm(s)
• To mute an alarm, so that it does not appear in the alarm list again the next time it is
triggered, select the
See the StudioStation 100 Help File for further information about the
tab within
Troubleshooting
Troubleshooting
Alarms
2 3 4
Troubleshooting Tab, Alarms Subtab
page opens, showing filtering controls and the alarm history list.
Troubleshooting, Alarms>Alarm History
( ).
2
checkbox (
Muted
StudioStation 100 • Web-Based User Interface
displays a list of alerts for events as determined
. Alarm list entries
tab at the top of the StudioStation 100
tab (see figure 60, ) on the second tier of
3
5
Clear Selected
) for that alarm.
3
Alarms
3
2
).
1
page.
66