Extron electronics StudioStation 100 User Manual page 77

To change the minimum available recording time on the storage device, enter a number
6
into the field (see
Time
arrows to adjust the value. The time range is 2 to 30 minutes. The default setting is 10
minutes. The StudioStation 100 will start recording when the selected storage device
has more than 10 minutes of recording time left.
NOTES:
• The default recording destination on the StudioStation 100 is the USB drive
attached to the RCP 101.
• The disk space alarm is triggered when the remaining record time is less than
10 minutes.
Click the button.
7 Save
Alternately, click the
8
Cancel
figure 67 on the previous page) or click the
button if you do not want to save the changes.
StudioStation 100 • Web-Based User Interface
and
Up Down
70