Extron electronics StudioStation 100 User Manual page 38

— This single page (see
1 Device Status
view of the status of the input and outputs along with details of the active recording and
stream (the current event). The URLs of the streams are also displayed on this page.
— The three pages within this tab provide a calendar view
2
Recorded Events
of previous and current recording events, as well as scheduling and publishing
configuration options (see
— The eight pages within this tab contain the core controls typically
3
Configuration
needed during initial setup, or for upgrading the unit, or restoring a configuration. They
make it possible for an administrator to configure basic AV input settings, such as:
Output video test patterns for setup.
•
Configure output stream settings and presets.
•
Set up AV encoding and presets, select or configure layouts and layout presets.
•
Set passwords, set up notices and alarms, and select preview window settings.
•
The pages also provide a way to configure basic communication,
Configuration
identity, time, data storage, and recording location settings. These pages also
make it possible to update firmware or restore a configuration from a saved file (see
Configuration on page 42) .
— This page provides a way to view folders and files on the
4 File Management
internal drive and any attached external drive. It also provides a way to connect the
StudioStation 100 to shared network drives (see
— The five pages within this tab display factory-defined and
5 Troubleshooting
user-defined information about the unit and the encoded streams, display a log of
events and a log of alarms and their status, provide three simple diagnostic tools for
checking network connections, and provide a way to perform a variety of types of
resets on the StudioStation 100 (see
— This page provides an easy way to connect the StudioStation 100
6 StudioStation
to the IPL T PC1 and test the connection (see
Pages Within Tabs
The Recorded Events,
Configuration,
several pages. To access each page, click the corresponding function within the second tier
of tabs (sub-tabs) located below the main tabs near the top of the screen (
> Input/Output Settings
Figure 12. Pages Within Tabs (Subtabs)
Panels and screen sections
Each StudioStation 100 web page contains at least one panel and a main window with
sections that group the controls and information for each page. Most panels include
controls and a variety of adjustments and settings. Specific sections can include controls
or simply display information. Sections or panels can include tabs with additional selections
and options.
All StudioStation 100 web pages include the
(see AV Controls Panel on page 34). The
also serves as the main operating interface. It contains one panel and three sections. Pages
such as the
Systems Settings
each with a different collection of information and settings.
figure 11
Recorded Events
on page 39).
File Management
Troubleshooting
StudioStation
and
Troubleshooting
shown selected in figure 12).
AV Controls
Device Status
page within the
Configuration
StudioStation 100 • Web-Based User Interface
on the previous page) provides a
on page 60).
on page 63).
on page 69).
tabs each include
Configuration
panel at the left of the screen
page is the main page and
tab include several panels,
31