Extron electronics StudioStation 100 User Manual page 61

1
2
Figure 42. Password Panel
Setting passwords
If no passwords are set, anyone who opens the internal web pages is connected with
administrator-level access and can make changes to all settings. To limit access and prevent
changes to system configuration, the following options are available:
• Set an administrator level password only — This option allows only administrators
to access the StudioStation 100 web pages. End users cannot log in to use the web
pages.
Set both an administrator level password and a user level password — This
•
allows administrators to log in and manage all aspects of the StudioStation 100. Users
can log in to use just the
To set passwords:
1. Enter the desired password, at least four characters long, into the
field in the
Password:
Passwords must consist of alphanumeric characters (letters and numbers) only.
•
Special characters and punctuation are not allowed.
Passwords are case-sensitive.
•
2. Enter the same password into the
Administrator Password
panel ( ) are accessible.
ID: user 2
3. If no user password is set, click
To set a user password, complete steps 4 through 6.
4. To set a user level password, type a desired password into the
the pane (
Login ID: user
5.
Type the same password into the
field.
User Password
6. Click ( ). Both the administrator and user passwords are saved.
Save 3
Clearing Passwords
To remove (clear) a password, click
password and click (
Save 3
NOTE: When the administrator password is cleared, the user password is also cleared.
3
4
4
panel and the
AV Controls
pane (see figure 42,
Login ID: admin
Confirm Password:
field. Once a password is entered, the fields in the
( ) in the upper right of the
3
Save
).
2
Confirm Password:
( ) corresponding to the administrator or user
Clear 4
) to remove.
StudioStation 100 • Web-Based User Interface
page.
Device Status
Administrator
).
1
field directly below the
Login
panel.
Password
User Password:
field directly below the
field in
54