Initialization; Hardware Initialization (When The Master Card Or Id Is Lost) - IDTECK 100R Manual

Initialization

When you lost the Configuration Card or forget the Master PIN number, you may need to re
-initialize the unit for new setup. There is a hard-wired Initialize function on the unit.
You may lose all setup data after Initialization.
1 Hardware Initialization (When the master card or ID is
lost)
1. Open the top case taking out four bolts on the back.
2. As the left picture, make two jumpers short in state of being on power
3. 3-color LED blinking with beep sound indicates success of initialization
13
p.48