Setting The Date And Time; Selecting A Default Language - Digital Equipment AlphaStation 500 Series User Information

Console Commands
Select second floppy drive capacity:
5.25" 1.2MB
3.5" 1.44MB
3.5" 2.88
none
Select keyboard:
U.S.
Japanese
French
German
Spanish
Spanish
Canadian/French
Swiss
Italian
Finnish/Swedish keyboard
Norwegian keyboard
Danish
U.K.
Enter SCSI Host ID (0 - 7) for SCSI bus number 0: 7

Setting the Date and Time

The Set system time command is located in the Setup menu. Use this command
to set the system's date and time.

Selecting a Default Language

The first time power is applied after updating the ARC console firmware, you are
prompted to select a default ARC console language.
1. At the Set system language menu, select either English or Other
language as appropriate. If you selected English, your Alpha system displays the
Boot menu (or the Setup menu if you selected the Set system language
command from there), and you have completed this task.
A-4 AlphaStation 500 Series User Information
101-key keyboard
106-key keyboard
102-key keyboard
102-key keyboard
102-key keyboard
variation
102-keyboard
102-key keyboard
102-key keyboard
102-key keyboard
102-key keyboard