Removing The Floppy Drive From The Original Drive Tray; Figure 3-17 Removing The Floppy Drive (Original Tray) - Digital Equipment AlphaStation 500 Series User Information

Installing System Options

Removing the Floppy Drive from the Original Drive Tray

To remove the floppy from the left side drive tray assembly (original design), see Figure 3-
17 and follow this procedure:
1. Remove the four mounting screws
š
clamps that hold the drive and slide the floppy drive
assembly.
2. Remove the EMI shield
1

Figure 3-17 Removing the Floppy Drive (Original Tray)

3-26 AlphaStation 500 Series User Information
™
on both sides of the drive. Push back on the
œ
that is under the floppy drive.
3
4
›
out of the drive tray
2
MA00977