Installing Your System; Figure 2-2 System Enclosure Airflow - Digital Equipment AlphaStation 500 Series User Information

Getting Started

Installing Your System

The AlphaStation 500 Series Installation Information you received with your system
graphically outlines the steps to follow to install your system.
1. Make sure you received all of your system components. Use Appendix H, Equipment
Log, to list your equipment. If something is missing, please contact your distributor or
Digital representative.
2. Position your system so that air can flow freely to and from the vents, as shown in
Figure 2-2.
_______________________ CAUTIONS _________________________
To ensure that your system is properly cooled:
•
Make sure that air can freely flow into the front, out of the side and rear of
the system unit.
•
Do not remove a filler plate until you are ready to add a new system
component.
___________________________________________________________
2-4 AlphaStation 500 Series User Information

Figure 2-2 System Enclosure Airflow

MA00975