Installing System Options
System Memory
The AlphaStation 500 Series memory sub-system has two banks of memory, which include
(4 x 72) 8 byte Dual In-Line Memory Modules (DIMMs). The are two banks consisting
of four DIMMs. Adding more memory allows your system to run larger, more memory-
intensive software. You can increase your system's RAM to 1 GB.
Cache Memory
Each AlphaStation 500 Series system has either 2 MB or 8 MB on the system board.
Cache size depends on the Model ordered.
Memory Configuration Rules
•
Random-access memory can be added only in four DIMM increments (four per bank).
•
There are two banks, A & B. Bank A includes J30, J28, J26 and J25. Bank B includes
J23, J29, J27, and J22. Refer to Figure 3-5 and Figure 3-6.
•
Always fill at least one bank completely (A or B)
•
To fill a bank, start at one end and fill every other DIMM socket. Each bank MUST be
completely filled with like DIMMs.
•
Do not mix DIMMs within a bank
•
Use same DIMM size within a bank.
•
Use same DIMM vendor within a bank (recommended).
3-8 AlphaStation 500 Series User Information