Manage Boot Selection Menu - Digital Equipment AlphaStation 500 Series User Information

If you selected Other language, you are prompted for the location of the
message and font files. Go to step 2.
2. Insert the diskette or CD-ROM containing the ARC console firmware message and
font files into a drive. If the files are located on your hard disk, go to step 3.
3. Select either Floppy disk, CD-ROM, or Hard Disk as appropriate, and press
[Enter]. The languages available are displayed on the screen.
4. At the Language menu, select the language of your choice and press [Enter].
5. The screen clears and you are asked if you would like to save the language files to
hard disk. Select Yes and press [Enter].
6. You are prompted to choose a location on the hard disk for the language files. (A
default location is selected.) Press [Enter] to accept the default; otherwise, select
Alternate Hard Disk location and press [Enter].
Edit the partition and the directory location to indicate where you wish to store the
language files, then press [Enter]. The language files are copied to the hard disk, and the
ARC Boot menu appears in the language you selected.
__________________________ Note _____________________________
You can also change the default language at the other time by selecting Set up
the system, then selecting Set system language, and following the
prompts.
____________________________________________________________

Manage Boot Selection Menu

You reach the Boot selection menu by selecting Manage boot selection menu
from the Setup menu. Use the Boot selection menu to add, change, check, delete, dump
(list), and rearrange boot selections.
Initially, select Add a boot selection. You are then prompted to select:
•
A system partition for this boot selection. (The partition defined by the Set
default environment variables command should be one of your choices.)
Select a system partition for this boot selection.
SCSI
New System Partition
(The partition defined by the Set default environment variables command
must be one of the available choices.)
•
The osloader directory and name.
Bus 0 Hard Disk 0
Console Commands
Partition 2
AlphaStation 500 Series User Information A-5