3D Systems ProJet 6000 User Manual page 49

CAUTION: In the next step, make certain to move the cart very slowly to prevent damage to the cart and the machine .
9 . Slowly push the cart completely into the machine so the umbilical connector is positioned directly under the umbilical cable .
10 . Connect the umbilical cable to the umbilical connector . Press down on the cable to make certain it is seated, then lift up on the
connector latch to secure the cable in place .
11 . After connecting the umbilical, push against the cart and make certain it is resting against the back of the machine .
49
3D Systems, Inc.