Material Cart - 3D Systems ProJet 6000 User Manual

MATERIAL CART

Item Function
Handle Can be raised and lowered for moving the material cart .
Connector Latch Secures umbilical from the machine to the material cart connector .
Umbilical Connector Umbilical from the machine is connected here to provided power and control signals to the material cart .
Connects the material cart to the print tray . Material is pumped through the material hose to add or remove
Material Hose
material from the print tray .
Press to extend the material bottle holder . Allows user to change material bottles without removing the
Release Button
material cart from the machine. See figure below.
Material bottles provide new material for the system . The material cart pump transfers material from the
Material Bottle
material bottles to the material reservoir .
Holds material bottles . Material bottles are seated onto the coupling in the bottom of the holder .
Material Bottle Holder
Flexible tubing connects the material bottle to the material reservoir .
Material Reservoir Holds the material needed to fill the print tray for initial filling and during normal operation.
3D Systems, Inc.
22