Start A Print Job - 3D Systems ProJet 6000 User Manual

ProJet™ 6000 Printer Status
7 . The

START A PRINT JOB

After print jobs have been submitted to the printer,
the user may use the front panel to select and start a
particular print job .
1 . Press the Prints key .
2 . The system will display the
3 . Select a print job by touching the name on the
display .
4 . Press the Start Print key .
3D Systems, Inc.
screen is displayed with the
Prints screen .
block .bff
part displayed in the print queue .
63