Print Applicator - 3D Systems ProJet 6000 User Manual

Print Applicator

Control/Indicator Function
Print Applicator
Shows the current position of the print applicator relative to the home position .
Positioning
Specifies the applicator speed, in inches per second, during manual motion.
Velocity
This setting does not affect the applicator speed during the build .
Distance Distance in inches to move .
Vacuum Switch vacuum for the applicator On or Off .
Move Applicator Manually moves print applicator as specified by the user, with velocity/distance.
Moves the applicator motion axis to the home position and redefines the home position (relative zero
Home
position of the applicator) .
Remove Bubbles Manually starts the routine for removing bubbles .
NOTE: The default VisiJet material heater settings can be found in the VisiJet® SL Materials for ProJet™ 6000
Systems - Part Building and Post-Processing .
3D Systems, Inc.
38