3D Systems ProJet 6000 User Manual page 40

Profiling
When is selected, the panel displays the functions outlined in red .
Control/Indicator Function
X Width Shows the beam width, in mils, in the X direction .
Y Width Shows the beam width, in mils, in the Y direction .
Max ADC Shows the maximum intensity of the beam .
Peak Sum Indicates how well the beam is focused; the higher the value, the better the focus.
Profile at pinhole
Perform a profile of the Printhead's drawing spot at the specified pinhole.
Call this action once the Printhead's drawing spot is on the profiler to have the Printer find all the profiler
Find Pinholes
pinholes .
3D Systems, Inc.
40