Figure 20: Ucm6104 Static Route Sample - Grandstream Networks UCM6100 Series User Manual

Configure the gateway address so that the UCM6100 can reach the destination
via this gateway. Gateway address is optional.
Gateway
Example:
192.168.40.5
Specify the network interface on the UCM6100 to reach the destination using the
static route.
Interface For UCM6102, LAN interface is eth0; WAN interface is eth1.
For UCM6104, LAN1 interface is eth0; WAN interface is eth1.
For UCM6108/UCM6116, only LAN interface is available.
Static routes configuration can be reset from LCD menuNetwork Menu.
The following diagram shows a sample application of static route usage on UCM6104.
The network topology of the above diagram is as below:
•
Network 192.168.69.0 has IP phones registered to UCM6104 LAN 1 address
•
Network 192.168.40.0 has IP phones registered to UCM6104 LAN 2 address
•
Network 192.168.66.0 has IP phones registered to UCM6104 via VPN
•
Network 192.168.40.0 has VPN connection established with network 192.168.66.0

Figure 20: UCM6104 Static Route Sample

UCM6100 Series User Manual
P a g e 61
|