Lower Leg Assembly; 50/200 Hour Service; Lower Leg Installation - SRAM ROCKSHOX RUDY XPLR Service Manual

L o w e r L e g A s s e m b l y
5 0 / 2 0 0 H o u r S e r v i c e
1 Clean the upper tubes. Clean the upper tubes.
2 Apply grease to the inner surfaces of the wiper seals. Apply grease to the inner surfaces of the wiper seals.
Wiper seals may already be greased from the factory. Wiper seals may already be greased from the factory.
Do not apply extra grease to seals that already have Do not apply extra grease to seals that already have
grease on them. grease on them.
3 Hold the lower leg flat and inject 10 mL of suspension oil into each Hold the lower leg flat and inject 10 mL of suspension oil into each
lower leg. lower leg.
Keep the lower leg flat to prevent oil from leaking out. Keep the lower leg flat to prevent oil from leaking out.
Do not exceed the recommended oil volume per leg as this can
damage the fork.
L o w e r L e g I n s t a l l a t i o n
NOTI CE
RockShox Dynamic Seal Grease
10 mL: 0w-30 10 mL: 0w-30
31

Lower Leg Assembly