External I/O Signal Display - Mitsubishi Electric MR-J2S-*A series Instruction Manual

6. DISPLAY AND OPERATION

6.6 External I/O signal display

The ON/OFF states of the digital I/O signals connected to the servo amplifier can be confirmed.
(1) Operation
Call the display screen shown after power-on.
Using the "MODE" button, show the diagnostic screen.
(2) Display definition
Input signals
Always lit
Output signals
The 7-segment LED shown above indicates ON/OFF.
Each segment at top indicates the input signal and each segment at bottom indicates the output signal.
The signals corresponding to the pins in the respective control modes are indicated below:
CN1B CN1B CN1B
15 9 8
CN1A
14
Press UP once.
External I/O signal display screen
CN1B CN1A CN1B
7 8 14
CN1B CN1B
CN1B
18 4
6
6 - 9
CN1B CN1B CN1B
5 17 16
CN1A
CN1B
CN1A
18
19
19
Lit: ON
Extinguished: OFF