3.10.5.3
Sorting the parameter table
The values of the parameters are arranged in rows. The parameter table can be sorted by
any displayed column.
● In columns containing numerical values, sorting is based on the magnitude of the
numerical value.
● In text columns, sorting is alphabetical.
Sorting by column
1. Position the cursor in the header cell of the desired column.
The background of this cell turns blue.
2. Click the column header.
Result
The entire parameter table is sorted by the selected column. A triangle with tip facing up
appears in the column header.
Clicking the column header again changes the sorting as follows:
● Symbol "▲": Parameter table is sorted in ascending order.
● Symbol "▼": Parameter table is sorted in descending order.
● No symbol: The sorting is removed again. The parameter table assumes the default
display.
The "../" prefix in the "Name in DB" column is ignored when sorting.
3.10.5.4
Transferring parameter data to other editors
After selecting an entire parameter row of the parameter table, you can use the following:
● Drag-and-drop
● <Ctrl+C>/<Ctrl+V>
● Copy/Paste via shortcut menu
Transfer parameters to the following editors of the TIA Portal:
● Program editor
● Watch table
● Signal table for trace function
The parameter is inserted with its full name: See information in "Full name in DB" column.
PID control
Function Manual, 03/2017, A5E35300227-AC
Configuring a software controller
3.10 Parameter view
59