Cont_S; Technology Object Cont_S - Siemens SIMATIC S7-1200 Function Manual

7.2

CONT_S

7.2.1

Technology object CONT_S

The technology object CONT_S provides a step controller for actuators with integrating
behavior and is used to control technical temperature processes with binary output value
output signals. The technology object corresponds to the instance data block of the CONT_S
instruction. The operating principle is based on the PI control algorithm of the sampling
controller. The step controller operates without a position feedback signal. Both manual and
automatic mode are possible.
S7-1500
All parameters and tags of the technology object are retentive and can only be changed
during download to the device if you completely download CONT_S.
See also
Overview of software controller (Page 38)
Add technology objects (Page 40)
Configure technology objects (Page 42)
CONT_S (Page 455)
Downloading technology objects to device (Page 44)
PID control
Function Manual, 03/2017, A5E35300227-AC
Using PID basic functions
7.2 CONT_S
213