Process Documentation - Miele PG 8583 Operating Instructions Manual

Process documentation

Memory
Adding cycle
numbers
112
Documentation of processes
Processes are documented per cycle. Required and actual values are
always recorded.
During a program sequence, the following data is recorded, among
other things:
– Machine type and serial number
– Date
– Program start and program name
– Cycle number
– Wash blocks used
– Dispensing system, dispensing temperature and required
dispensing quantity
– Required values for temperatures and exposure times
– Maximum and minimum temperature during exposure time
– Wash pressure measuring results
– All error messages
– Program end
– System messages, e.g. refill salt.
Further data can be incorporated into the report as required. Contact
Miele Service for more information.
Depending on the size of the report, between 10 and max. 20 cycle
reports are stored in an internal power loss safe memory within the
machine. In the event of e.g. network or printer problems these can
be subsequently recalled. If the memory is full, the oldest report is
overwritten.
Raw data for a graphic output of process data from the last program
is also stored. These can be converted into graphics by external
documentation software. The transmission of raw data requires an
Ethernet interface. Graphic representations in the display or as output
to a directly connected printer are not possible. There is no power
loss memory for graphic information.
Miele Service can add subsequent cycle numbers, e.g. in the event of
software updates or if the machine controls are replaced.