Activating
dispensing
systems
Dispensing systems
Up to two process chemicals can be dispensed in each wash block.
Using the following menu you can activate and vent the dispensing
system, change the name if necessary and set the dispensing
concentration for all programs.
Individual dispensing systems can be activated or deactivated for all
programs as follows.
Open the menu as follows:
button
Additional settings
Dispensing system
DOS...
(name of dispensing system)
DOS
Active
Inactive
–
Active
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see "Program charts").
Inactive
–
The selected dispensing system is deactivated for all programs.
Select an option using the and arrow buttons.
Press OK to save the setting.
Additional settings
85