Miele PG 8583 Operating Instructions Manual page 137

Problem
The cleaning result is
unsatisfactory.
Items made of glass are
showing signs of
corrosion.
Possible cause and solution
Mobile units, baskets, modules and inserts were not
suitable for the load.
Select mobile units, baskets, modules and inserts which

are suitable for the task.
Mobile units, baskets, inserts and modules were incorrectly
loaded or overloaded.
Arrange the wash load correctly according to the

information in the operating instructions. according to
the information in the operating instructions.
Avoid overloading the mobile units, baskets, modules

and inserts.
The program was not suitable for the soiling.
Select a suitable program.

or
Adjust the parameters to suit the task.

A spray arm is blocked.
Ensure the spray arms are not obstructed when

arranging the wash load.
Injector nozzles on the mobile units, baskets, modules or
inserts are blocked.
Check the nozzles and clean them as necessary.

The filters in the wash chamber are dirty.
Check the filters and clean them if necessary.

Mobile units, baskets or modules were not correctly
mounted on the water connection.
Check the adapter.

The items are not suitable for machine reprocessing.
Only use items which are declared by their manufacturer

as suitable for machine reprocessing.
Neutralization has not taken place during the program.
Check the level in the reservoir and vent the dispensing

system if necessary.
The wash temperature was too high.
Select a different program.

or
Reduce the wash temperature.

The process chemicals used were too alkaline.
Use a milder process chemical.

or
Reduce the concentration of process chemicals.

Frequently asked questions
137