Miele PG 8583 Operating Instructions Manual page 68

Settings 
Resetting the
counter
Setting the interval
68
The counter for the cleaning interval may be reset only after
cleaning has been completed.
Reset
– Yes
The counter is reset.
No
–
The counter will not be reset.
Use the  and  arrow buttons to select an option and press OK to

confirm your selection.
The interval depends on the number of programs sequences and
must be set on the basis of usage and the expected number of
particles/solids in the soiling.
Example:
For weekly cleaning with 2 program sequences per day and 5
workdays in the week, this yields an interval of 10 (2 x 5 = 10). With a
higher incidence of particles, a shorter interval should be selected in
order to clean the filters several times weekly.
The setting value is entered in increments of 5. The possible range is
shown in the bottom line of the display.
Use the arrow buttons  (higher) and  (lower) to set the Interval.

Press OK to save the setting.

Yes
No
Interval
10
(5 - 100)