Do not fill the reservoir with water.
The reservoir could overflow when filled with salt.
Add salt only until the funnel of the salt reservoir is full, so that it
can close properly. Do not add more than 4 lbs. (2 kg) of salt.
As the salt reservoir is being filled, displaced water (saline solution)
may run out.
Clean any excess salt from the area around the salt reservoir and
especially from the seal. Do not use running water as this can
cause the salt reservoir to overflow.
Close the reservoir.
Rinse
Run the
program after refilling salt.
This will ensure that any traces of salt and saline solution are
dissolved and rinsed off.
Salt and saline solution which has overflowed can cause severe
corrosion damage to the wash chamber if they are not rinsed away.
Water softener
35