Activate A Factory Calibration - Mahr Millimar C 1200 Operating Instructions Manual

To avoid any measurement errors that may be caused by previously created customer
calibration, it is advisable to implement the factory standard calibration. This constant
is stored in the measuring instrument and calibration functions cannot be altered by the
customer.
6.3

Activate a Factory calibration

– Press the ON / OFF key
=> The standard menu will appear on
the screen
– Press the u key to select the System
menu
– Select the submenu Customer
calibration with the q key
– Press 4 to confirm
– Press the q key to select Enable
– Press 4 to confirm or press Ó to
cancel selection
=> The symbol 4 depicts the currently
active correction
– To exit the input menu, press the ON /
OFF key.
Mahr GmbH • Millimar C1200
Measurement Display Setup
Absolute mode
Customer calibration
Factory calibration
Factory Settings
Info
6 3
Measurement Display Setup
Factory calibration
Enable
Factory standard calibration
Werksnormalkalibrierung
Customer calibration Reset
6 3
Measurement Display Setup
Absolute mode
Customer calibration
Factory calibration
Factory Settings
Info
6 3
System
ü
q p
System
q p
System
ü
q p
41