Connecting The Probe; Select Type Of Probe - Mahr Millimar C 1200 Operating Instructions Manual

2.6

Connecting the probe

– Connect the probe to the probe input
A
2.7

Select type of probe

– Press the ON / OFF key
=> The standard menu will appear on
the screen
– Select the Setup menu with the u
or t keys
– Select the Probe type with the q or
p keys
– Press 4 to select the probe type or
press Ó to cancel selection
– Select the required Probe type with
the q or p.
=> For compatible probes, see Chapter
8.2, Page 47
– Press 4 to select the probe type or
press Ó to cancel selection
– To exit the menu, press the ON / OFF
key.
16
Probe input A
Measurement Display Setup
Language
Unit
Probe type
ECO mode
t u
Measurement Display Setup
Language
Unit
Probe type
ECO mode
6 3
Measurement Display Setup
Probe type
Standard Probe
Long Probe
6 3
Mahr GmbH • Millimar C1200
System
English
mm
Standard Probe
On
q
System
English
mm
Standard Probe
On
q p
System
q