Table of Contents
Advertisement
!
Forfeiture of warranty
Services that are caused to viruses that were introduced via a network connection or another
data carrier, are generally excluded from the warranty services.
Storage temperatures below –10 °C or above +50 °C and relative humidity levels above 85 %
will invalidate the warranty of this instrument.
Safety information
This measuring instrument complies with the relevant safety regulations. It was dispatched
from our production facility in a flawless condition and perfect working order. However, failure
to follow the instructions given below can cause personal injury or death.
1.
Before you connect up and use this measuring instrument for the first time, please read
the accompanying documentation (operating instructions).
Follow the safety precautions detailed in the operating instructions.
2.
Keep the documentation close to the measuring instrument ready for quick reference.
3.
Follow all safety precautions, accident prevention regulations and internal company rules
and guidelines. If necessary you should request further information from your company
safety officer.
4.
Before connecting up this measuring instrument, please check the local mains supply
voltage to ensure that it is within the working range of the AC adaptor (100 V - 240 V,
50 Hz - 60 Hz). If they do not match, this measuring instrument must not be connected
under any circumstances!
5.
The instrument may only be connected to a protective earth (grounded) power socket
which complies with the respective vacover guidelines and regulations of the local power
supply company. This also applies to any extension cables that are used.
6.
Only use the original and intact AC adaptors.
7.
When connecting inductive probes make ensure that the plug is firmly screwed onto the
connection sockets.
8.
When connecting pneumatic probes make sure that the compressed air is connected
properly.
9.
Do not drop the measuring instrument. Always make sure that the measuring instrument
is securely positioned.
10.
Do not operate the measuring instrument in areas where there is a risk of explosion.
Also do not expose the measuring instrument to direct sunlight!
11.
Do not clean the membrane keypad with solvent-based cleaning agents.
12.
Before opening the housing always disconnect the power supply.
13.
The test and measuring equipment for which the Millimar is used are subject to
inspection equipment monitoring.
For this reason, regular inspection equipment monitoring performed by either the user or
Mahr Service must ensure compliance to the specified error limits.
Mahr GmbH • Millimar C1200
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Millimar C 1200 and is the answer not in the manual?
Questions and answers