Mahr Millimar C 1200 Operating Instructions Manual page 2

Dear valued customer,
Congratulations on choosing a product from Mahr GmbH. We kindly request that you follow
these instructions in order to ensure the long term accuracy of this measuring instrument.
We operate a policy of continuous improvement and are constantly developing our products,
especially with regard to renaming of type designations. It is possible therefore that there may
be slight differences between the text and illustrations in this document and the measuring
instrument in your possession. We reserve the right to make changes to the design and scope
of supply, the right to undertake further technical developments, and all rights relating to
translation of this documentation.
© by Mahr GmbH, Esslingen
The following symbols are used in these operating instructions:
General information
!
Important information
Attention - Danger
Failure to follow instructions marked with these symbols can cause inaccurate results
and lead to considerable damage to this product!
Introduction
Intended working conditions
The Millimar C 1200 is a Compact amplifier (compact electronic length measuring and
evaluating instrument) for use in a production environment. An inductive probe can be
connected to the C1200.
The operating, maintenance and repair information specified in these operating instructions
must be observed.
In order to achieve the best use of this measuring instrument it is very important that you first
read these operating instructions.
The scope of supply of this length measuring instrument includes:
- Measuring instrument
- Mains power supply unit with interchangeable adaptors
- Operating instructions
2
Mahr GmbH • Millimar C1200