Table of Contents
Advertisement
4. Product installation
4.1 General installation considerations
This section provides instructions for installing the RDX 8000.
4.1.1 Selecting a location
Select a location that meets the following criteria:
Criteria
Mounting orientation
Rack requirements
Room temperature
Operating
Non-operating
Power source
Air quality
Humidity
Operating
Non-operating
For further information, see section
RDX 8000 User Guide
Horizontal only-either sitting on a table top or mounted in a 19" equip-
ment rack via the included rack mount ears. The RDX 8000 weighs 15.7
lbs (7.1 kg) when fully populated with cartridges and must be placed on
or mounted in a system capable of supporting this weight.
Standard EIA rack 2U space
+10° – +40° C, gradient 10°C/hour
- 30° – +60° C, gradient 20°C/hour
100-240 VAC input voltage
50-60 Hz line frequency
1.2-0.6 A
Locate the RDX 8000 within 6 ft. of an AC outlet.
The AC power cord is the RDX 8000 main AC disconnect device and must
be easily accessible at all times.
Place the RDX 8000 in an area with minimal sources of particulate
generation. Excessive dust and debris can damage the system.
Avoid locating the unit in areas near frequently used doors and walk-
ways, smoke-filled rooms, or areas where it may easily be knocked over.
20 – 80 % non-condensing
20 – 90 % non-condensing
"1.1 Physical specification" on page
Definition
75.
12
Advertisement
Table of Contents
