Table of Contents
Advertisement
To execute the Cartridge Access Test select the "Start Test" button, the RDX 8000 unit will then bulk eject all currently
inserted cartridges and ask the user to remove them from the unit.
Figure 46 — Cartridge Access Test
The operator will then be asked to insert a cartridge in each of the eight slots in sequence. The RDX 8000 unit will then
perform the slot access test and eject the cartridge and provide a pass/fall status.
Upon completion of testing of all eight locations the operator can confirm "OK" which will log the results to the
diagnostic test log. The operator will be instructed to place the user data cartridges back into the unit, and the unit will
reconnect to the iSCSI network.
Figure 47 — RDX 8000 Diagnostics Results
67
RDX 8000 User Guide
Advertisement
Table of Contents
