Table of Contents
Advertisement
RDX 8000 Diagnostics
The RDX 8000 unit supports a number of interactive diagnostic tests designed to check specific areas of operation of the
device. The tests are all designed to be executed locally so the unit's behavior can be observed. The tests are as follows:
Slot UI Test:
It tests each slot for eject button indication and sensing- requires a local operator to interact with the unit.
Display Test:
It tests the LCD display and backlight operation- requires a local operator to step the display with the OCP navigation
button and observe the display through various states to confirm operation.
Fan Test:
It tests the operation of the RDX 8000 cooling fan, steps the fan speed through four RPM ranges while monitoring fan
rpm.
Cartridge Access Test:
It tests the operation of each slot location by checking communication with a test cartridge. Execution of this test
will force the unit offline and eject all inserted cartridges from the unit. This is a data safety feature to insure the test
operator can use a scratch cartridge. This test requires a local operator to interact with the unit.
To start the diagnostic test sequence select each test by checking each test from the list that you would like to perform
and push the "Start Diagnostic" button. You may select to run only one test or all four, upon completion of the selected
test(s) a new diagnostic log status page will be created capturing the current test status.
64
RDX 8000 User Guide
Advertisement
Table of Contents
