Quantum RDX 8000 User Manual page 22

RDX 8000 User Guide
4. The IQN(s) for the RDX 8000 unit should be shown under
available targets.
5. Highlight the RDX 8000 IQN by clicking on it.
6. Depending upon which version of MS Initiator in use you may
need to either click "Log On" or "Connect".
7. The RDX 8000 IQN should now change to CONNECTED.
8. The RDX 8000 is now connected via iSCSI.
9. If the System Mode is Tape Library: - In Device Manager The
RDX 8000 will be identified as a Media Changer and a tape
drive.
10. If the System Mode is JBOD:
In Disk Management 8 Removable Media drives will be identi-
fied. Depending on the host operating system, 8 drives may be
visible in Windows Explorer.
22